Change of ion precipitation and surface roughness of three dental alloys coexisting

doi:10.19439/j.sjos.2020.01.008

Abstract

Abstract: PURPOSE: To study the change of ion precipitation and surface roughness of three dental alloys'coexisting in standard electrolyte solution, in order to provide a reference for the selection of clinical alloy materials. METHODS: Standard samples of Ni-Cr alloy, Co-Cr alloy and Au-Ag-Pd alloy were prepared and divided into 5 groups: Ni-Cr alloy(group N), Co-Cr alloy(group C), Au-Ag-Pd alloy(Group A), Ni-Cr alloy contact with Au-Ag-Pd alloy(group NA), Ni-Cr alloy contact with Co-Cr alloy(group NC). All groups of alloys were soaked in standard electrolyte solution (T=37 ℃, pH=2.31) for 7 days. Inductively coupled plasma mass spectrometry (ICP-MS) was used to measure the amount of ions released from each group. The surface morphology of each group was observed and the surface roughness(Ra) was measured using atomic force microscope（AFM）. SPSS 18.0 software package was used for statistical analysis. RESULTS: The amount of nickel ions released from group N, NA, NC was (1.32±; 0.03) μg/cm2, (2.13±; 0.07) μg/cm2, (1.53±; 0.08) μg/cm2, respectively. Nickel ions of group NA and NC was significantly more than that of group N(P<; 0.05), nickel ions of group NA was significantly more than that of group NC(P<; 0.05). The amount of chromium ions released from group N, NA, NC was (0.06±; 0.01) μg/cm2, (0.08±; 0.01) μg/cm2, (0.05±; 0.01) μg/cm2, respectively, the amount of chromium ions of group NA was significantly more than that of group NC(P<; 0.05). The surface roughness of Ni-Cr alloy in group N, NA, NC was (4.60±; 0.16) nm, (5.37±; 0.08) nm, (5.04±; 0.15) nm, respectively. The surface roughness of Ni-Cr alloy in group NA and group NC was significantly larger than that in group N (P<; 0.05). When contact with Au-Ag-Pd alloy or Co-Cr alloy, the amount of nickel ions released and the surface roughness of Ni-Cr alloy both significantly increased. Compared with Co-Cr alloy, Au-Ag-Pd alloy caused Ni-Cr alloy to release more nickel, chromium ions and formed a rougher surface. CONCLUSIONS: It is necessary to avoid simultaneous application of Ni-Cr alloy and Au-Ag-Pd alloy, or Ni-Cr alloy and Co-Cr alloy in the patient's mouth. Non-precious metals should be avoided as much as possible clinically.

Key words: Alloy, Galvanic corrosion, Ion precipitation, Surface roughness

CLC Number:

R783.1

ZHANG Hua, ZHOU Tuan-feng, YANG Xue, ZHOU Yi-xiao. Change of ion precipitation and surface roughness of three dental alloys coexisting[J]. Shanghai Journal of Stomatology, 2020, 29(1): 40-45.

References

[1] Aykent F, Yondem I, Ozyesil AG, et al.Effect of different finishing techniques for restorative materials on surface roughness and bacterial adhesion[J]. J Prosthet Dent, 2010, 103(4): 221-227.
[2] Glauser S, Astasov-Frauenhoffer M, Müller JA, et al.Bacterial colonization of resin composite cements: influence of material composition and surface roughness[J]. Eur J Oral Sci, 2017, 125(4): 294-302.
[3] Mercieca S, Caligari Conti M, Buhagiar J, et al.Assessment of corrosion resistance of cast cobalt- and nickel-chromium dental alloys in acidic environments[J]. J Appl Biomater Funct Mater, 2018, 16(1): 47-54.
[4] Lucchetti MC, Fratto G, Valeriani F, et al.Cobalt-chromium alloys in dentistry: An evaluation of metal ion release[J]. J Prosthet Dent, 2015,114(4):602-608.
[5] Lages RB, Bridi EC, Pérez CA, et al.Salivary levels of nickel, chromium, iron, and copper in patients treated with metal or esthetic fixed orthodontic appliances: A retrospective cohort study[J]. J Trace Elem Med Biol, 2017,40: 67-71.
[6] Qu Y, Lu X, Huang Y, et al.Mechanisms of cytotoxicity of nickel ions based on gene expression profiles[J]. Biomaterials, 2009, 30(2): 141-148.
[7] Reclaru L, Unger RE, Kirkpatrick CJ, et al.Ni-Cr based dental alloys;Ni release, corrosion and biological evaluation[J]. Mater Sci Eng C Mater Biol Appl, 2012, 32(6): 1452-1460.
[8] Zhang Y, Xiao F, Liu XM, et al.Cr(VI) induces cytotoxicity in vitro through activation of ROS-mediated endoplasmic reticlulum stress and mitochondrial dysfunction via the P13K/Akt signaling pathway[J]. Toxicol In Vitro, 2017,41: 232-244.
[9] Karov J, Hinberg I.Galvanic corrosion of selected dental alloys[J]. J Oral Rehabil, 2001, 28(3): 212-219.
[10] 孟贺, 韩东, 战德松. 5种牙科合金对小鼠成纤维细胞毒性及凋亡相关基因的表达[J].中华口腔医学杂志, 2009, 44(8): 497-501.
[11] 杜雅, 黄克强, 芦琳, 等. 4种烤瓷基底冠金属对人牙龈成纤维细胞分泌前列腺素E2和环加氧酶2的影响[J]. 中华口腔医学杂志, 2012, 47(7): 431-434.
[12] ISO 10271 Standard.Dental metallic materials-corrosion test methodsSO 10271 Standard.Dental metallic materials-corrosion test methods[S]. Switzerland: ISO Geneva, 2011.
[13] 林红. 口腔材料学[M]. 第2版. 北京: 北京大学医学出版社, 2013: 21-22.
[14] Popov BN.Corrosion engineering: principles and solved problems[M]. Netherlands: Elsevier B.V., 2015: 239-287.
[15] Ciszewski A, Baraniak M, Brychczyńska MU.Corrosion by galvanic coupling between amalgam and different chromium-based alloys[J]. Dent Mater, 2007, 23(10): 1256-1261.
[16] Manaranche C, Hornberger H.A proposal for the classification of dental alloys according to their resistance to corrosion[J].Dent Mater, 2007, 23(11): 1428-1437.
[17] Imirzalioglu P, Alaaddinoglu E, Yilmaz Z, et al.Influence of recasting different types of dental alloys on gingival fibroblast cytotoxicity[J]. J Prosthet Dent, 2012, 107(1): 24-33.
[18] McGinley EL, Moran GP, Fleming GJ. Biocompatibility effects of indirect exposure of base-metal dental casting alloys to a human-derived three- dimensional oral mucosal model[J]. J Dent, 2013, 41(11): 1091-1100.
[19] Teranaka A, Tomiyama K, Ohashi K, et al.Relevance of surface characteristics in the adhesiveness of polymicrobial biofilms to crown restoration materials[J]. J Oral Sci, 2018, 60(1): 129-136.
[20] Ammar Y, Swailes D, Bridgens B, et al.Influence of surface roughness on the initial formation of biofilm[J]. Surf Coat Technol, 2015, 284: 410-416.
[21] Kim SK, Park IJ, Lee DY, et al.Influence of surface roughness on the electrochemical behavior of carbon steel[J]. J Appl Electrochem, 2013,43(5): 507-514.
[22] Evgeny B, Hughes T, Eskin D.Effect of surface roughness on corrosion behavior of low carbon steel in inhibited 4M Hydrochloric acid under laminar and turbulent flow conditions[J]. Corros Sci, 2016, 103(2): 196-205.