Study on the accuracy of Co-Cr-Mo alloy removable partial denture framework fabricated by selective laser melting

doi:10.19439/j.sjos.2020.06.007

Abstract

Abstract: PURPOSE: To evaluate the accuracy of Co-Cr-Mo alloy removable partial denture (RPD) frameworks, which were fabricated by selective laser melting(SLM) technology. METHODS: 3Shape 3D optical scanner was used to scan a plaster model of maxillary Kennedy I dentition defect, and the obtained 3D topographical data were reconstructed into a digital model. Computer-aided design (CAD) of RPD framework was performed using 3shape design software. Five Co-Cr-Mo RPD frameworks were fabricated by SLM technology, then each framework was scanned to obtain 3D data and compared with the original CAD data, respectively, to evaluate the match accuracy. RESULTS: The Co-Cr-Mo scaffolds were in good position on the plaster model, and the tissue surface was adhered to the plaster model without warping. The overall 3D deviation from the original model was (0.088±0.021) mm. CONCLUSIONS: The Co-Cr-Mo framework fabricated by SLM technology in this experiment has less deviation and higher accuracy.

Key words: Removable partial denture, Framework, Selective laser melting, Co-Cr-Mo alloy, Accuracy

CLC Number:

R783.2

XU Hong-zhen, GONG Zhi-cheng, ZHONG Qun. Study on the accuracy of Co-Cr-Mo alloy removable partial denture framework fabricated by selective laser melting[J]. Shanghai Journal of Stomatology, 2020, 29(6): 596-600.

References

[1] 许卫星, 袁剑鸣, 唐颖, 等. 激光钴铬基底冠与铸造钴铬合金基底冠的边缘密合度比较[J].上海交通大学学报, 2016, 36(10): 1478-1481.
[2] 戴宜君, 董研, 彭伟, 等. SLM 打印钴铬合金基底冠精度及密合性研究[J]. 实用口腔医学杂志, 2018, 34(2): 158-163.
[3] Sun J, Zhang FQ.The application of rapid prototyping in prosthodontics[J]. J Prosthodont, 2012, 21(8): 641-644.
[4] Alaghemand H, Abolghasemzadeh F, Pakdel F, et al.Comparison of microleakage and thickness of resin cement in ceramic inlays with various temperatures[J]. J Dent Res Dent Clin Dent Prospects, 2014, 8(1): 45-50.
[5] 翁蓓军, 黄伟昊, 李国强. CAD/CAM全瓷冠与激光熔覆烤瓷冠边缘适合性的研究[J]. 口腔材料器械杂志, 2014, 23(4): 185-188.
[6] Abdullah AO, Tsitrou EA, Pollington S.Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns[J]. J Appl Oral Sci, 2016, 24(3): 258-263.
[7] Chang HS, Peng YT, Hung WL, et al.Evaluation of marginal adaptation of Co-Cr-Mo metal crowns fabricated by traditional method and computer-aided technologies[J]. J Dent Sci, 2019, 14(3): 288-294.
[8] 陈建宇, 张志光, 李子夫. 选择性激光熔化技术在口腔医学领域中的应用[J]. 国际口腔医学杂志, 2014, 41(1): 97-101.
[9] Huang Z, Zhang L, Zhu J, et al.Clinical marginal and internal fit of metal ceramic crowns fabricated with a selective laser melting technology[J].J Prosthet Dent, 2015, 113(6): 623-627.
[10] Koutsoukis T, Zinelis S, Eliades G, et al.Selective laser melting technique of Co-Cr dental alloys: a review of structure and properties and comparative analysis with other available techniques[J]. J Prosthodont, 2015, 24(4): 303-312.
[11] Kajima Y, Takaichi A, Nakamoto T, et al.Fatigue strength of Co-Cr-Mo alloy clasps prepared by selective laser melting[J]. J Mech Behav Biomed Mater, 2016, 59: 446-458.
[12] Wang H, Zhao BJ, Liu CK, et al.A comparison of bio-compatibility of a titanium alloy fabricated by electron beam melting and selective laser melting[J]. PLoS One, 2016, 11(7): e0158513.
[13] 陈光霞, 曾晓雁, 王泽敏, 等. 可摘除局部义齿支架的选择性激光熔化制造技术[J]. 现代制作工程, 2010, 6(1): 64-68.
[14] Bajunaid SO, Altwaim B, Alhassan M, et al.The fit accuracy of removable partial denture metal frameworks using conventional and 3D printed techniques: an in vitro study[J]. J Contemp Dent Pract, 2019, 20(4): 476-481.
[15] Chen H, Li H, Zhao Y, et al.Adaptation of removable partial denture frameworks fabricated by selective laser melting[J]. J Prosthet Dent, 2019, 122(3): 316-324.
[16] Kanazawa M, Iwaki M, Minakuchi S, et al.Fabrication of titanium alloy frameworks for complete dentures by selective laser melting[J]. J Prosthet Dent, 2014, 112(6): 1441-1447.
[17] Svanborg P, Skjerven H, Carlsson P, et al.Marginal and internal fit of cobalt-chromium fixed dental prostheses generated from digital and conventional impressions[J]. Int J Dent, 2014: 534382.
[18] 刘一帆, 王伟娜, 于海, 等. 选择性激光熔覆(SLM)钛合金可摘局部义齿支架的适合性研究[J]. 实用口腔医学杂志, 2017, 33(3): 302-305.
[19] Chochlidakis KM, Papaspyridakos P, Geminiani A, et al.Digital versus conventional impressions for fixed prosthodontics: a systematic review and meta-analysis[J]. J Prosthet Dent, 2016, 116(2): 184-190.
[20] 陈光霞, 覃群. 选择性激光熔化快速成型复杂零件精度控制及评价方法[J]. 组合机床与自动化加工技术, 2010, 2(1): 102-105.
[21] 刘一帆. SLM 3D打印可摘局部义齿钛合金支架的应用基础研究[D]. 西安: 第四军医大学, 2017.
[22] Han J, Wu M, Ge Y.A study on the dimension accuracy on the inner structure of the 3D printed parts caused by the scanning strategy[J]. Materials (Basel), 2019, 12(8): 1333-1343.
[23] Maamoun AH, Xue YF, Elbestawi MA, et al.Effect of selective laser melting process parameters on the quality of al alloy parts: powder characterization, density, surface roughness, and dimensional accuracy[J]. Materials (Basel), 2018, 11(12): 2343-2365.
[24] 林会杰, 沈理达, 姜金辉, 等. 选区激光熔化成型悬垂结构特征模拟分析[J]. 航空学报, 2018, 39(7): 234-242.
[25] Krug RS.Metal framework modifications to accommodate wrought wire clasps in distal extension removable partial dentures[J]. J Prosthet Dent, 2003, 89(1):79-81.