Effects of different resin removal methods on shear bond strength of rebonded orthodontic brackets

Abstract

Abstract: PURPOSE: To compare the shear bond strength (SBS) of rebonded orthodontic metal brackets with different resin removal methods. METHODS: Forty extracted premolars were chosen as samples and divided into 4 experimental groups. The teeth were bonded with brackets. The brackets from 3 groups were debonded while adhesive remnants were removed from bracket bases by methods of grinding, sandblasting, and direct flaming, respectively and then rebonded. The SBS values of all rebonded brackets were determined after pH cycling experiment for 30 days. Some rebonded bracket bases were selected and observed under scanning electron microscope (SEM). The data was analyzed by one-way ANOVA test using SPSS 13.0 software package. RESULTS: Statistical analysis revealed a significant difference of SBS values among the 4 experimental groups (P<0.05). The SBS values of the group by direct flaming was significantly lower compared to the other groups (P<0.05). There was no significant difference of SBS values among the other groups. CONCLUSIONS: The rebonded brackets after resin removal by grinding and sandblasting have a similar SBS compared to the initial brackets adhesive.

Key words: Bracket rebonded, Shear bond strength, Scanning electron microscope

CLC Number:

R783.5

WU Hai-miao,ZHAO Bin-jiao,CHEN Dong. Effects of different resin removal methods on shear bond strength of rebonded orthodontic brackets[J]. Shanghai Journal of Stomatology, 2015, 24(3): 307-310.

References

[1] 张秀乾, 张小红, 严明, 等.脱落托槽3种不同方法处理后粘接强度的对比 [J].实用口腔医学杂志, 2009, 25(2): 170-173.
[2] 杨力,蔡萍.不同方法处理脱落托槽后其抗剪切强度对比研究 [J].口腔材料器械杂志, 2009, 18(1): 11-14.
[3] 牛宏, 金作林, 段银钟. 托槽重复黏结及不同处理方法对抗剪强度的影响 [J].实用口腔医学杂志, 2007, 23(3): 408-410.
[4] Chun CH, Fadem BW, Levitt HL, et al. Effects of two adhesion boosters on the shear bond strength of new and rebonded orthodontic brackets[J]. Am J Orthod Dentofacial Orthop, 2000, 118(3): 295-299.
[5] Halwai HK, Kamble RH, Hazarey PV, et al. Evaluation and comparision of the shear bond strength of rebonded orthodontic brackets with air abrasion, flaming and grinding techniques: an in vitro study [J].Orthodontics(Chic), 2012, 13(1): e1-9.
[6] 缪耀强. 正畸托槽脱落原因分析[J].口腔正畸学, 1994, 1(1): 22-24.
[7] Evans LJ, Peters C, Flickinger C, et al. A comparison of shear bond strengths of orthodontic brackets using various light sources, light guides, and cure times [J]. Am J Orthod Dentofacial Orthop, 2002, 121(5): 510-515.
[8] Ishida K, Endo T, Shinkai K, et al. Shear bond strength of rebonded brackets after removal of adhesives with Er, Cr: YSGG laser [J]. Odontology, 2011, 99(2): 129-134.
[9] 胡炜,王勤,傅民魁, 等.正畸粘接用玻璃离子粘固剂防止托槽周围釉质脱矿的体外pH循环实验 [J]. 中华口腔医学杂志, 2003, 38(2): 109-112.
[10] Quick AN, Harris AM, Joseph VP. Office reconditioning of stainless steel orthodontic attachments [J]. Eur J Orthod, 2005, 27(3): 231-236.
[11] Yassaei S, Aghili H, KhanPayeh E, et al. Comparison of shear bond strength of rebonded brackets with four methods of adhesive removal [J]. Lasers Med Sci, 2014, 29(5): 1563-1568.
[12] 穆宏, 刘学丽, 吴永生, 等. 影响托槽粘结强度的因素 [J]. 现代口腔医学杂志, 2007, 21(6): 650-652.