新型纳米羟基磷灰石复合树脂与牙本质的黏结性能评价

上海口腔医学 ›› 2013, Vol. 22 ›› Issue (3): 274-277.

新型纳米羟基磷灰石复合树脂与牙本质的黏结性能评价

赵蒙蒙，王青山，王爽，王方辉，舒静媛

(滨州医学院附属医院口腔内科，山东滨州 256603)

收稿日期:2012-12-04 修回日期:2013-01-13 出版日期:2013-06-10 发布日期:2013-06-10
通讯作者: 王青山，E-mail:wqsyahao@yahoo.com.cn
作者简介:赵蒙蒙(1986-)，女，硕士，E-mail:zhaomeng0524@126.com
基金资助:
山东省自然科学基金(Y2008C159)

Bonding performance evaluation between the new nano-hydroxyapatite composite resin and dentin

ZHAO Meng-meng, WANG Qing-shan, WANG Shuang, WANG Fang-hui, SHU Jing-yuan

Department of Oral Medicine, Affiliated Hospital to Binzhou Medical College. Binzhou 256603, Shandong Province, China

Received:2012-12-04 Revised:2013-01-13 Online:2013-06-10 Published:2013-06-10
Supported by:
Supported by Natural Science Foundation of Shandong Province (Y2008C159).

摘要/Abstract

摘要： 目的：检测新型纳米羟基磷灰石复合树脂与牙本质间的黏结强度，评价该材料对牙体组织的黏结性能。方法：健康离体磨牙36颗，随机分为3组，制作牙本质黏结面，分别黏结纳米羟基磷灰石复合树脂、复合树脂卡瑞斯玛、玻璃离子水门汀，经冷热交替试验后，测定各组试件的抗剪切力，计算剪切强度；体视显微镜下观察各组试件断裂界面断裂类型，采用SPSS17.0软件包对数据进行统计学分析。结果：纳米羟基磷灰石复合树脂的剪切强度为(11.23±4.6082) N/mm2，复合树脂卡瑞斯玛的剪切强度为(14.49±7.9855) N/mm2，玻璃离子水门汀的剪切强度为(10.08±6.3701) N/mm2，3组之间的抗剪切强度无显著差异；试件的黏结面断裂类型绝大多数为界面断裂，3组之间差异无显著性(P>0.05)。结论：纳米羟基磷灰石复合树脂作为一种新型牙体修复性材料，与牙体组织之间具有良好的黏结性能，达到了临床应用的要求。

关键词: 纳米羟基磷灰石, 复合树脂, 牙本质, 抗剪切强度, 黏结界面, 黏结

Abstract: PURPOSE: To evaluate the shear bond strength and bonding ability between the new nano-hydroxyapatite composite resin and tooth structure. METHODS: Thirty-six healthy isolated molars were randomly assigned to 3 groups according to the material employed: new nano-hydroxyapatite composite resin, composite resin karisma and glass ionomer cement. After thermal cycling, the data of shear bond strength was recorded, and the type of specimen fracture section was observed under stereo microscope. The data was analyzed statistically by SPSS17.0 software package. RESULTS: The average shear bonding strength of nano-hydroxyapatite composite resin was(11.23±4.6082) N/mm2,and that of composite resin charisma and glass ionomer cement was(14.49±7.9855) N/mm2 and(10.08±6.3701) N/mm2, respectively. No significant difference was found among 3 groups. The bonding fracture mode of each specimen had no significant difference(P>0.05). CONCLUSIONS: As a new dental restorative material, new nano-hydroxyapatite composite resin has superior bonding ability and can be used in clinical therapy.

Key words: Nano-hydroxyapatite, Composite resin, Dentin, Shear bond strength, Bonding interface, Bonding

中图分类号:

R783.1

赵蒙蒙, 王青山, 王爽, 王方辉, 舒静媛. 新型纳米羟基磷灰石复合树脂与牙本质的黏结性能评价[J]. 上海口腔医学, 2013, 22(3): 274-277.

ZHAO Meng-meng, WANG Qing-shan, WANG Shuang, WANG Fang-hui, SHU Jing-yuan. Bonding performance evaluation between the new nano-hydroxyapatite composite resin and dentin[J]. Shanghai Journal of Stomatology, 2013, 22(3): 274-277.

参考文献

[1] Bhatt HA, Kalita SJ. Influence of oxide-based sintering additives on densification and mechanical behavior of tricalcium phosphate(TCP)[J]. J Mater Sci Mater Med, 2007, 18(5): 883-893.
[2] Lee JH, Um CM, Lee IB. Rheological properties of resin composites according to variations in monomer and filler composition[J]. Dent Mater, 2006, 22(6): 515-526.
[3] Martin FE. Adhesive bonding--some clinical considerations[J]. Ann R Australas Coll Dent Surg, 2006, 18: 30-35.
[4] 王卫华. 树脂修复材料理化特征及其在龋齿临床应用中的评价[J]. 中国组织工程研究与临床康复, 2010, 14(16): 2983-2986.
[5] 罗娟, 王新知, 刘学恒. 纳米增韧牙科复合树脂的研究[J]. 临床口腔医学杂志, 2007, 23(7): 394-396.
[6] 吕奎龙, 张久兴, 孟祥才. 纳米羟基磷灰石对人工龋的影响[J]. 材料科学与工艺, 2006, 14(6): 633-636.
[7] 许乾慰, 姚畅旺, 葛永静. 单组分可见光固化齿科正畸黏结剂力学性能研究[J]. 化学推进剂与高分子材料,2007,5(2): 55-59.
[8] Sadat-Shojai M, Atai M, Nodehi A, et al. Hydroxyapatite nanorods as novel fillers for improving the properties of dental adhesives: synthesis and application[J]. Dent Mater, 2010, 26(5): 471-482.
[9] 谢民, 赵立新, 高成山. 纳米羟基磷灰石对软化牙本质再矿化效果实验研究[J]. 贵州医药, 2009, 33(1): 19-20.
[10] Skrtic D, Antonucci JM, Eanes ED, et al. Dental composites based on hybrid and surface-modified amorphous calcium phosphates[J]. Biomaterials, 2004, 25(7-8): 1141-1150.
[11] Wang QS, Wang Y, Li R,et al. Effects of light-initiation agent on mechanical properties of light-cured nano-hydroxyapatite composite for dental restoration[J]. Appl Mech Mater, 2012, 138-139: 1012-1016.
[12] 王云, 王青山. 牙体修复性纳米羟基磷灰石复合材料的机械性能研究[J]. 现代口腔医学杂志, 2011, 25(2): 115-117.
[13] 赵珊, 李延报, 李东旭. 功能性羟基磷灰石生物复合材料的研究进展[J]. 材料导报, 2010, 24(8): 69-72.
[14] 李瑞, 王青山, 赵蒙蒙, 等. 牙体修复性纳米羟基磷灰石复合材料生物相容性评价[J]. 牙体牙髓牙周病学杂志, 2012, 22(3): 157-160.
[15] 刘崇武, 吴春芳, 陈超, 等. 不同冷热循环次数对复合树脂粘结后抗剪切强度的影响[J]. 福建医科大学学报,2011,45(1):20-22.
[16] Nikaido T, Kunzelmann KH, Chen H, et al. Evaluation of thermal cycling and mechanical loading on bonding strength of a self-etching primer system to dentin[J]. Dent Mater, 2002, 18(3): 269-275.
[17] Matinlinna JP, Lassila LV, Ozcan M, et al. An introduction to silanes and their clinical applications in dentistry[J]. Int J Prosthodont, 2004, 17(2): 155-164.
[18] Kadoma Y. Surface treatment agent for dental metals using a thiirane monomer and a phosphoric acid monomer[J]. Dent Mater J, 2002, 21(2): 156-169.
[19] Della Bona A, van Noort R. Shear vs. tensile bond strength of resin composite bonded to ceramic[J]. J Dent Res, 1995, 74(9): 1591-1596.
[20] Meng X, Yoshida K, Atsuta M. Hardness development of dual-cured resin cements through different thicknesses of ceramics[J]. Dent Mater J, 2006, 25(1): 132-137.