辛伐他汀/聚己内酯纤维膜的缓释性能研究

上海口腔医学 ›› 2016, Vol. 25 ›› Issue (6): 673-677.

辛伐他汀/聚己内酯纤维膜的缓释性能研究

赵丙姣¹, 许瑶², 刘月华¹

1.上海市口腔病防治院·上海市口腔医院正畸科,上海 200031;;
2.新疆医科大学第五附属医院口腔科,新疆乌鲁木齐 830011

收稿日期:2016-01-18 出版日期:2016-12-25 发布日期:2016-12-29
通讯作者: 刘月华,E-mail: joshua66@126.com
作者简介:赵丙姣（1979-）,女,博士,副主任医师,E-mail:zhaobingjiao@sina.com
基金资助:
上海市自然科学基金（15ZR1435900）

Drug release from electrospun simvastatin/polycaprolactone fibrous membranes

ZHAO Bing-jiao¹, XU Yao², LIU Yue-hua¹

1.Department of Orthodontics, Shanghai Stomatological Hospital. Shanghai 200031;
2.Department of Stomatology, The Fifth Affiliated Hospital, Xinjiang Medical University. Urumqi 830011, Xinjiang Uygur Autonomous Region, China

Received:2016-01-18 Online:2016-12-25 Published:2016-12-29

摘要/Abstract

摘要： 目的以聚己内酯(polycaprolactone, PCL)为静电纺丝材料,制备载有辛伐他汀(simvastatin,SMV)的纤维膜,分析其药物缓释特征,构建具有SMV缓释功能的支架材料,用于牙周组织工程。方法将SMV和PCL溶解于三氯甲烷,得到均相溶液,制备载SMV的PCL纤维膜作为实验组,以纯PCL纤维膜作为对照组。对所得纤维膜采用扫描电子显微镜和广角X射线衍射进行形貌和表征分析,通过紫外分光光度计测定纤维膜释放至介质中的SMV,绘制释放曲线,分析载SMV纤维膜的药物缓释特征。采用SPSS 17.0软件包对数据进行统计学分析。结果SMV/PCL纤维膜由纳米级静电纺丝构成,SMV与PCL结合较好,药物包裹于纤维之中;累计SMV释放量与时间接近线性相关,能够实现药物的长效缓释。结论通过静电纺丝技术构建SMV/PCL纳米纤维膜,具有良好的药物缓释作用,有望作为支架材料应用于牙周组织工程。

关键词: 静电纺丝, 辛伐他汀, 缓释, 牙周再生

Abstract: PURPOSE: To prepare electrospun simvastatin/polycaprolactone(SMV/PCL) membrane scaffolds and to evaluate the release properties of this formulation. METHODS: Electrospun SMV/PCL membrane scaffolds were prepared as the experimental group, and electrospun PCL membrane as the control group. The morphology and characteristics of membrane surface were determined by scanning electron microscopic(SEM) and X-ray diffraction(XRD). The release profile of SMV was determined using an ultraviolet-visible spectrometer. The data were analyzed statistically with SPSS 17.0 software package. RESULTS: SEM and XRD indicated that SMV/PCL nanofibers were successfully electrospun and SMV was encapsulated into the fibers. In vitro drug release studies showed that simultaneous SMV release, being nearly linear with time, was achieved and sustained SMV release was prolonged to 28 days. CONCLUSIONS: Electrospun SMV/PCL nanofiber membranes demonstrate sustained drug release properties, suggesting their potential applicability as prospective scaffolds in periodontal regeneration.

Key words: Electrospinning, Simvastatin, Controlled release, Periodontal regeneration

中图分类号:

R783.1

赵丙姣, 许瑶, 刘月华. 辛伐他汀/聚己内酯纤维膜的缓释性能研究[J]. 上海口腔医学, 2016, 25(6): 673-677.

ZHAO Bing-jiao, XU Yao, LIU Yue-hua. Drug release from electrospun simvastatin/polycaprolactone fibrous membranes[J]. Shanghai Journal of Stomatology, 2016, 25(6): 673-677.

参考文献

[1] Zamani M, Morshed M, Varshosaz J, et al. Controlled release of metronidazole benzoate from poly epsilon-caprolactone electrospun nanofibers for periodontal diseases[J]. Eur J Pharm Biopharm, 2010, 75(2): 179-185.
[2] Reise M, Wyrwa R, Müller U, et al. Release of metronidazole from electrospun poly(L-lactide-co-D/L-lactide) fibers for local periodontitis treatment [J]. Dent Mater, 2012, 28(2): 179-188.
[3] Zhao BJ, Liu YH. Simvastatin induces the osteogenic differentiation of human periodontal ligament stem cells [J]. Fundam Clin Pharmacol, 2014, 28(5): 583-592.
[4] 赵丙姣, 李远远, 刘月华. 辛伐他汀/聚己内酯静电纺丝膜的制备及其生物相容性评价 [J]. 临床口腔医学杂志, 2014, 30(4): 198-202.
[5] Seto H, Ohba H, Tokunaga K, et al. Topical administration of simvastatin recovers alveolar bone loss in rats [J]. J Periodontal Res, 2008, 43(3): 261-267.
[6] Dalcico R, de Menezes AM, Deocleciano OB, et al. Protective mechanisms of simvastatin in experimental periodontal disease [J]. J Periodontol, 2013, 84(8): 1145-1157.
[7] Rashidi H, Ellis MJ, Cartmell SH, et al. Simvastatin release from poly(lactide-co-glycolide) membrane scaffolds [J]. Polymers, 2010, 2(4): 709-718.
[8] Zeng J, Yang L, Liang Q, et al. Influence of the drug compatibility with polymer solution on the release kinetics of electrospun fiber formulation [J]. J Control Release, 2005, 105(1-2): 43-51.
[9] Piskin E, Isoglu IA, Bölgen N, et al. In vivo performance of simvastatin-loaded electrospun spiral-wound polycaprolactone scaffolds in reconstruction of cranial bone defects in the rat model [J]. J Biomed Mater Res A, 2009, 90(4): 1137-1151.
[10] Wadagaki R, Mizuno D, Yamawaki-Ogata A, et al. Osteogenic induction of bone marrow-derived stromal cells on simvastatin-releasing, biodegradable, nano- to microscale fiber scaffolds [J]. Ann Biomed Eng, 2011, 39(7): 1872-1881.
[11] Wang CZ, Fu YC, Jian SC, et al. Synthesis and characterization of cationic polymeric nanoparticles as simvastatin carriers for enhancing the osteogenesis of bone marrow mesenchymal stem cells [J]. J Colloid Interface Sci, 2014, 432: 190-199.
[12] Sundararaj SC, Thomas MV, Peyyala R, et al. Design of a multiple drug delivery system directed at periodontitis [J]. Biomaterials, 2013, 34(34): 8835-8842.
[13] Puhl S, Li L, Meinel L, et al. Controlled protein delivery from electrospun non-wovens: novel combination of protein crystals and a biodegradable release matrix[J]. Mol Pharm, 2014, 11(7): 2372-2380.
[14] Vacanti NM, Cheng H, Hill PS, et al. Localized delivery of dexamethasone from electrospun fibers reduces the foreign body response [J]. Biomacromolecules, 2012, 13(10): 3031-3038.