选择性激光熔覆钴铬钼合金可摘局部义齿支架的加工精度分析

doi:10.19439/j.sjos.2020.06.007

上海口腔医学 ›› 2020, Vol. 29 ›› Issue (6): 596-600.doi: 10.19439/j.sjos.2020.06.007

选择性激光熔覆钴铬钼合金可摘局部义齿支架的加工精度分析

徐红珍¹, 龚志成², 钟群¹

1.上海市口腔病防治院永嘉路门诊部,2.修复工艺科,上海 200031

收稿日期:2019-12-23 修回日期:2020-03-25 出版日期:2020-12-25 发布日期:2021-01-08
通讯作者: 钟群,E-mail：zhongqun681115@qq.com
作者简介:徐红珍（1985-）,女,博士,主治医师,E-mail:xuhongzhen_021@fudan.edu.cn
基金资助:
上海市口腔病防治院院级项目（SSDC-2017-05）

Study on the accuracy of Co-Cr-Mo alloy removable partial denture framework fabricated by selective laser melting

XU Hong-zhen¹, GONG Zhi-cheng², ZHONG Qun¹

1. Department of Yongjia Dental Clinic, 2. Department of Prosthodontics Technology, Shanghai Stomatological Hospital. Shanghai 200031, China

Received:2019-12-23 Revised:2020-03-25 Online:2020-12-25 Published:2021-01-08

摘要/Abstract

摘要： 目的： 采用选择性激光熔覆（selective laser melting,SLM）技术制作钴铬钼合金可摘局部义齿（removable partial denture,RPD）支架,评估其加工精度。方法： 采用3Shape三维光学扫描仪口外扫描上颌肯氏I类牙列缺损石膏模型,将获取的三维形貌数据重建为数字化模型。利用3shape设计软件在其上进行RPD支架的计算机辅助（computer aided design,CAD）设计。SLM制作5个钴铬钼RPD支架,扫描各支架,获取三维数据,与原CAD数据进行逆向比对,评估其加工精度。结果： SLM钴铬钼支架在石膏模型上就位顺利,组织面与模型贴合,无翘动。与原模型之间的总体3D偏差值为(0.088±0.021) mm。结论： 采用SLM技术打印的钴铬钼合金RPD支架偏差较小,精度较高。

关键词: 可摘局部义齿, 支架, 选择性激光熔覆, 钴铬钼合金, 精度

Abstract: PURPOSE: To evaluate the accuracy of Co-Cr-Mo alloy removable partial denture (RPD) frameworks, which were fabricated by selective laser melting(SLM) technology. METHODS: 3Shape 3D optical scanner was used to scan a plaster model of maxillary Kennedy I dentition defect, and the obtained 3D topographical data were reconstructed into a digital model. Computer-aided design (CAD) of RPD framework was performed using 3shape design software. Five Co-Cr-Mo RPD frameworks were fabricated by SLM technology, then each framework was scanned to obtain 3D data and compared with the original CAD data, respectively, to evaluate the match accuracy. RESULTS: The Co-Cr-Mo scaffolds were in good position on the plaster model, and the tissue surface was adhered to the plaster model without warping. The overall 3D deviation from the original model was (0.088±0.021) mm. CONCLUSIONS: The Co-Cr-Mo framework fabricated by SLM technology in this experiment has less deviation and higher accuracy.

Key words: Removable partial denture, Framework, Selective laser melting, Co-Cr-Mo alloy, Accuracy

中图分类号:

R783.2

徐红珍, 龚志成, 钟群. 选择性激光熔覆钴铬钼合金可摘局部义齿支架的加工精度分析[J]. 上海口腔医学, 2020, 29(6): 596-600.

XU Hong-zhen, GONG Zhi-cheng, ZHONG Qun. Study on the accuracy of Co-Cr-Mo alloy removable partial denture framework fabricated by selective laser melting[J]. Shanghai Journal of Stomatology, 2020, 29(6): 596-600.

参考文献

[1] 许卫星, 袁剑鸣, 唐颖, 等. 激光钴铬基底冠与铸造钴铬合金基底冠的边缘密合度比较[J].上海交通大学学报, 2016, 36(10): 1478-1481.
[2] 戴宜君, 董研, 彭伟, 等. SLM 打印钴铬合金基底冠精度及密合性研究[J]. 实用口腔医学杂志, 2018, 34(2): 158-163.
[3] Sun J, Zhang FQ.The application of rapid prototyping in prosthodontics[J]. J Prosthodont, 2012, 21(8): 641-644.
[4] Alaghemand H, Abolghasemzadeh F, Pakdel F, et al.Comparison of microleakage and thickness of resin cement in ceramic inlays with various temperatures[J]. J Dent Res Dent Clin Dent Prospects, 2014, 8(1): 45-50.
[5] 翁蓓军, 黄伟昊, 李国强. CAD/CAM全瓷冠与激光熔覆烤瓷冠边缘适合性的研究[J]. 口腔材料器械杂志, 2014, 23(4): 185-188.
[6] Abdullah AO, Tsitrou EA, Pollington S.Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns[J]. J Appl Oral Sci, 2016, 24(3): 258-263.
[7] Chang HS, Peng YT, Hung WL, et al.Evaluation of marginal adaptation of Co-Cr-Mo metal crowns fabricated by traditional method and computer-aided technologies[J]. J Dent Sci, 2019, 14(3): 288-294.
[8] 陈建宇, 张志光, 李子夫. 选择性激光熔化技术在口腔医学领域中的应用[J]. 国际口腔医学杂志, 2014, 41(1): 97-101.
[9] Huang Z, Zhang L, Zhu J, et al.Clinical marginal and internal fit of metal ceramic crowns fabricated with a selective laser melting technology[J].J Prosthet Dent, 2015, 113(6): 623-627.
[10] Koutsoukis T, Zinelis S, Eliades G, et al.Selective laser melting technique of Co-Cr dental alloys: a review of structure and properties and comparative analysis with other available techniques[J]. J Prosthodont, 2015, 24(4): 303-312.
[11] Kajima Y, Takaichi A, Nakamoto T, et al.Fatigue strength of Co-Cr-Mo alloy clasps prepared by selective laser melting[J]. J Mech Behav Biomed Mater, 2016, 59: 446-458.
[12] Wang H, Zhao BJ, Liu CK, et al.A comparison of bio-compatibility of a titanium alloy fabricated by electron beam melting and selective laser melting[J]. PLoS One, 2016, 11(7): e0158513.
[13] 陈光霞, 曾晓雁, 王泽敏, 等. 可摘除局部义齿支架的选择性激光熔化制造技术[J]. 现代制作工程, 2010, 6(1): 64-68.
[14] Bajunaid SO, Altwaim B, Alhassan M, et al.The fit accuracy of removable partial denture metal frameworks using conventional and 3D printed techniques: an in vitro study[J]. J Contemp Dent Pract, 2019, 20(4): 476-481.
[15] Chen H, Li H, Zhao Y, et al.Adaptation of removable partial denture frameworks fabricated by selective laser melting[J]. J Prosthet Dent, 2019, 122(3): 316-324.
[16] Kanazawa M, Iwaki M, Minakuchi S, et al.Fabrication of titanium alloy frameworks for complete dentures by selective laser melting[J]. J Prosthet Dent, 2014, 112(6): 1441-1447.
[17] Svanborg P, Skjerven H, Carlsson P, et al.Marginal and internal fit of cobalt-chromium fixed dental prostheses generated from digital and conventional impressions[J]. Int J Dent, 2014: 534382.
[18] 刘一帆, 王伟娜, 于海, 等. 选择性激光熔覆(SLM)钛合金可摘局部义齿支架的适合性研究[J]. 实用口腔医学杂志, 2017, 33(3): 302-305.
[19] Chochlidakis KM, Papaspyridakos P, Geminiani A, et al.Digital versus conventional impressions for fixed prosthodontics: a systematic review and meta-analysis[J]. J Prosthet Dent, 2016, 116(2): 184-190.
[20] 陈光霞, 覃群. 选择性激光熔化快速成型复杂零件精度控制及评价方法[J]. 组合机床与自动化加工技术, 2010, 2(1): 102-105.
[21] 刘一帆. SLM 3D打印可摘局部义齿钛合金支架的应用基础研究[D]. 西安: 第四军医大学, 2017.
[22] Han J, Wu M, Ge Y.A study on the dimension accuracy on the inner structure of the 3D printed parts caused by the scanning strategy[J]. Materials (Basel), 2019, 12(8): 1333-1343.
[23] Maamoun AH, Xue YF, Elbestawi MA, et al.Effect of selective laser melting process parameters on the quality of al alloy parts: powder characterization, density, surface roughness, and dimensional accuracy[J]. Materials (Basel), 2018, 11(12): 2343-2365.
[24] 林会杰, 沈理达, 姜金辉, 等. 选区激光熔化成型悬垂结构特征模拟分析[J]. 航空学报, 2018, 39(7): 234-242.
[25] Krug RS.Metal framework modifications to accommodate wrought wire clasps in distal extension removable partial dentures[J]. J Prosthet Dent, 2003, 89(1):79-81.

选择性激光熔覆钴铬钼合金可摘局部义齿支架的加工精度分析

Study on the accuracy of Co-Cr-Mo alloy removable partial denture framework fabricated by selective laser melting

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	连梅菲, 张修银, 唐天弘, 忻贤贞. 数字化配准法测量种植体植入精度分析[J]. 上海口腔医学, 2023, 32(3): 287-291.
[2]	叶荣荣, 钟群, 王珏, 包向军, 龚志成, 贾爽. 3D打印与带模铸造法制作的可摘局部义齿对患者主观感受的影响[J]. 上海口腔医学, 2022, 31(3): 295-299.
[3]	叶盛佳, 包世婕, 陈渠奕, 忻贤贞, 董建辉, 魏斌. 种植导板精度非放射学评价方法的建立与应用评价[J]. 上海口腔医学, 2021, 30(5): 467-471.
[4]	常思佳, 杨柳, 李冉. 明胶-羟基磷灰石-磷酸三钙支架对hDPSCs的成骨刺激作用[J]. 上海口腔医学, 2020, 29(5): 492-498.
[5]	涂业颖, 周健, 于艳春, 樊明星, 泮海松, 林海燕. 国产六维导板辅助无牙颌种植手术的精度分析[J]. 上海口腔医学, 2020, 29(5): 504-508.
[6]	林颋旭, 赵宁, 钱文昊, 马晓晴. 铸造支架联合NITI悬臂梁矫正舌倾下颌磨牙的临床效果评价[J]. 上海口腔医学, 2019, 28(6): 666-669.
[7]	郭天文, 邢鹤琳, 王菁, 王宝成. 先天性缺牙患儿可摘义齿修复61例总结[J]. 上海口腔医学, 2019, 28(2): 196-200.
[8]	胡勤伟, 赵宁, 钱文昊, 马晓晴. 腭中缝微种植钉联合铸造支架前移上磨牙的临床效果评价[J]. 上海口腔医学, 2018, 27(6): 629-632.
[9]	李一涵, 张飞飞, 包世婕, 魏斌, 宫耀. 组织工程修复区早期牙移动压力侧牙周组织的改建[J]. 上海口腔医学, 2018, 27(5): 461-466.
[10]	孙斌, 王一清, 许悦, 石平, 周秦. Vitallium双重大连接体支架式义齿在Kennedy Ⅰ、Ⅱ类牙列缺损修复中的应用[J]. 上海口腔医学, 2018, 27(5): 518-521.
[11]	吴金双, 邢鹤琳, 董超芳, 郭天文, 杨瑟飞. 使用FUS-invest锆系牙科纯钛包埋料提高铸件的物理机械性能及精度[J]. 上海口腔医学, 2017, 26(2): 139-145.
[12]	钟群, 彭艳, 邬雪颖, 翁佳炜. 反复烧结对选择性激光熔覆钴铬合金烤瓷冠边缘微渗漏的影响[J]. 上海口腔医学, 2016, 25(6): 663-667.
[13]	彭艳, 钟群, 邬雪颖, 翁佳炜. 不同边缘设计对选择性激光熔覆钴铬合金基底冠边缘微渗漏的影响[J]. 上海口腔医学, 2016, 25(6): 668-672.
[14]	柏黎明, 李国强, 张强, 董晛. 2种支架设计对基牙及相关组织受力的三维有限元分析[J]. 上海口腔医学, 2016, 25(4): 431-437.
[15]	邬雪颖, 钟群. 3种钴铬钼合金美观卡环用于前磨牙的固位力分析[J]. 上海口腔医学, 2016, 25(3): 284-287.