江苏汉族人群上颌窦外侧骨壁厚度的锥形束CT研究

上海口腔医学 ›› 2013, Vol. 22 ›› Issue (5): 537-541.

江苏汉族人群上颌窦外侧骨壁厚度的锥形束CT研究

李俊¹，周芷萱²，袁华²，沈铭²，孙超³，陈宁^2,4

(1.江苏大学附属医院口腔科，江苏镇江 212001；2.南京医科大学口腔医学研究所，南京医科大学附属口腔医院口腔颌面外科，3.放射科，4.口腔种植科，江苏南京 210029)

收稿日期:2013-02-20 修回日期:2013-04-26 出版日期:2013-10-10 发布日期:2013-10-10
通讯作者: 陈宁，Tel: 025-85031856, E-mail: njcn@njmu.edu.cn
作者简介:李俊(1981-),男,硕士研究生,主治医师,E-mail:394390021@qq.com
基金资助:
国家自然科学基金(81271109)；江苏高校优势学科建设工程资助项目(2011-137)

A study of maxillary sinus lateral wall thickness of Han population in Jiangsu region using cone-beam CT

LI Jun¹, ZHOU Zhi-xuan², YUAN Hua², SHEN Ming², SUN Chao³, CHEN Ning^2,4

1.Department of Stomatology, Affiliated Hospital of Jiangsu University. Zhenjiang 212001; 2. Institute of Stomatology, School of Stomatology, Nanjing Medical University; Department of Oral and Maxillofacial Surgery, 3. Department of Radiology, 4. Department of Oral Implantology, School of Stomatology, Nanjing Medical University. Nanjing 210029, Jiangsu Province, China

Received:2013-02-20 Revised:2013-04-26 Online:2013-10-10 Published:2013-10-10
Supported by:
Supported by National Natural Science Foundation of China (81271109), Priority Academic Development Program of Jiangsu Higher Education Institutions (2011-137).

摘要/Abstract

摘要： 目的：应用锥形束CT(CBCT)分析上颌窦外侧骨壁的厚度，为口腔种植上颌窦底外提升术的手术指导和风险评估提供参考。方法：选取412例研究对象的上颌窦CBCT影像资料，结合种植专用Simplant软件，进行三维重建，选取测量截面，测量上颌窦外侧骨壁的厚度。采用SPSS17.0软件包对数据进行统计学分析。结果：412例(824侧)研究对象中，上颌窦外侧骨壁的平均厚度在上颌第二前磨牙(P2)、上颌第一磨牙(M1)和上颌第二磨牙(M2)区分别为(2.23±1.07) mm、(2.19±1.45) mm和(1.41±0.81) mm；左右侧上颌窦外侧骨壁厚度在 P2区具有显著差异(P<0.01)；男女间上颌窦外侧骨壁厚度在P2和 M2具有显著差异(P<0.05)，男性较女性稍厚；不同年龄组中M1和 M2区的上颌窦外侧骨壁厚度有显著差异(P<0.05)；牙缺失对于上颌窦外侧骨壁厚度的变化无显著影响。结论：锥形束CT可精确测量上颌窦外侧骨壁的厚度变化，不同牙位对应的上颌窦外侧骨壁厚度不同，上颌前磨牙区高于上颌磨牙区，最薄处位于M2区。不同年龄、性别之间和左右侧有一定差异。

关键词: 锥形束CT, 上颌窦, 骨厚度

Abstract: PURPOSE: To evaluate maxillary sinus lateral wall thickness by use of cone-beam computed tomography (CBCT), in order to provide anatomical basis for preoperative risk assessment and operation guidance of maxillary sinus lifting. METHODS: Using SimPlant software, the 3D images were reconstructed with CBCT images from 412 subjects and the thickness of maxillary sinus lateral wall were evaluated at measurement plane. The data was analyzed with SPSS17.0 software package. RESULTS: Among 412 subjects (824 sides), the mean thickness of maxillary sinus lateral wall at the second premolar (P2), the first molar (M1) and the second molar (M2) was 2.23±1.07 mm, 2.19±1.45 mm and 1.41±0.81 mm, respectively. The thickness of maxillary sinus lateral wall on the left side were significantly different from that on the right side at P2 (P<0.01). Significant gender differences on the thickness of maxillary sinus lateral wall were demonstrated at P2 and M2 (P<0.05), and the thickness in men were thicker than that in women. The thickness of maxillary sinus lateral wall at M1 and M2 were significantly different among different age groups (P<0.05). There was no significant difference on the lateral wall thickness with respect to presence or absence of tooth. CONCLUSIONS: CBCT can accurately measure the thickness of maxillary sinus lateral wall. The mean thickness of lateral wall changes at different reference points. The value at premolar region is greater than that at molar region, and the maxillary sinus lateral wall is the thinnest at M2. There are significant differences in the mean thickness of the lateral wall with respect to age, gender, and side of maxillay sinus.

Key words: Cone-beam computed tomography, Maxillary sinus, Bone thickness

中图分类号:

R782.12

李俊, 周芷萱, 袁华, 沈铭, 孙超, 陈宁,. 江苏汉族人群上颌窦外侧骨壁厚度的锥形束CT研究[J]. 上海口腔医学, 2013, 22(5): 537-541.

LI Jun, ZHOU Zhi-xuan, YUAN Hua, SHEN Ming, SUN Chao, CHEN Ning,. A study of maxillary sinus lateral wall thickness of Han population in Jiangsu region using cone-beam CT[J]. Shanghai Journal of Stomatology, 2013, 22(5): 537-541.

参考文献

[1] Neugebauer J, Ritter L, Mischkowski RA, et al. Evaluation of maxillary sinus anatomy by cone-beam CT prior to sinus floor elevation[J]. Int J Oral Maxillofac Implants, 2010, 25(2): 258-265.
[2] Sharan A, Madjar D. Maxillary sinus pneumatization following extractions: a radiographic study[J]. Int J Oral Maxillofac Implants, 2008, 23(1): 48-56.
[3] Güler AU, Sumer M, Sumer P, et al. The evaluation of vertical heights of maxillary and mandibular bones and the location of anatomic landmarks in panoramic radiographs of edentulous patients for implant dentistry[J]. J Oral Rehabil, 2005, 32(10): 741-746.
[4] Tatum H Jr. Maxillary and sinus implant reconstructions[J]. Dent Clin North Am, 1986, 30(2): 207-229.
[5] Boyne PJ, James RA. Grafting of the maxillary sinus floor with autogenous marrow and bone[J]. J Oral Surg,1980,38(8):613-616.
[6] Ella B, Noble Rda C, Lauverjat Y, et al. Septa within the sinus: effect on elevation of the sinus floor[J]. Br J Oral Maxillofac Surg, 2008, 46(6): 464-467.
[7] Zijderveld SA, van den Bergh JP, Schulten EA, et al. Anatomical and surgical findings and complications in 100 consecutive maxillary sinus floor elevation procedures[J]. J Oral Maxillofac Surg, 2008, 66(7): 1426-1438.
[8] Yang HM, Bae HE, Won SY, et al. The buccofacial wall of maxillary sinus: an anatomical consideration for sinus augmentation[J]. Clin Implant Dent Relat Res, 2009, 11(Suppl 1): e2-6.
[9] Neiva RF, Gapski R, Wang HL. Morphometric analysis of implant-related anatomy in Caucasian skulls[J]. J Periodontol, 2004, 75(8): 1061-1067.
[10] Yang SM, Park SI, Kye SB, et al. Computed tomographic assessment of maxillary sinus wall thickness in edentulous patients[J]. J Oral Rehabil, 2012, 39(6): 421-428.
[11] 山道信之, 系濑正通. 上颌窦底提升术:依据锥形束牙科CT影像诊断的高成功率植牙手术[M]. 北京: 人民军医出版社, 2012: 12.
[12] Park YB, Jeon HS, Shim JS, et al. Analysis of the anatomy of the maxillary sinus septum using 3-dimensional computed tomography[J]. J Oral Maxillofac Surg, 2011, 69(4): 1070-1078.
[13] Loubele M, Maes F, Schutyser F, et al. Assessment of bone segmentation quality of cone-beam CT versus multislice spiral CT: a pilot study[J]. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 2006, 102(2): 225-234.

[1]	卢雨桐, 史俊宇, 赖红昌. Astra锥形种植体在上颌窦穿牙槽嵴顶提升术中的短期效果评价[J]. 上海口腔医学, 2023, 32(3): 302-307.
[2]	王文丽, 傅亚婷, 刘华, 马潇. 上颌前牙美学区牙龈三维形态的锥形束CT测量分析[J]. 上海口腔医学, 2023, 32(2): 177-182.
[3]	张薇, 陈威, 陈志方. 可调式活动牵引器治疗上颌唇侧倒置阻生中切牙效果评价[J]. 上海口腔医学, 2023, 32(2): 193-197.
[4]	胡宁, 李凤丹, 江银华. 植骨与否对上颌窦底内提升同期种植术临床疗效的影响[J]. 上海口腔医学, 2023, 32(1): 101-104.
[5]	宋珏, 刘好好, 刘嘉靓, 陈美华. 上颌磨牙与上颌窦黏膜增厚发生的相关性分析[J]. 上海口腔医学, 2022, 31(6): 638-642.
[6]	吕云松, 李朝晖. 颞下颌关节紊乱综合征伴偏侧咀嚼患者锥形束CT特征分析[J]. 上海口腔医学, 2022, 31(6): 653-656.
[7]	周子芊, 陈振琦. 上颌窦底对上颌第一磨牙近中移动的影响[J]. 上海口腔医学, 2022, 31(6): 661-667.
[8]	林翔, 傅裕杰, 任根强, 温佳欢, 陈宇飞, 张旗. U-Net神经网络分割锥形束CT影像中下颌磨牙牙体与牙髓腔及其准确性验证[J]. 上海口腔医学, 2022, 31(5): 454-459.
[9]	马智菲, 周梦琪, 王丽珍, 承清, 洪瑾. Er:YAG 激光在小型猪牙髓血运重建术中的应用效果评价[J]. 上海口腔医学, 2022, 31(4): 367-373.
[10]	黄锦程, 赵华强, 李国菊. Stafne骨腔影像学特征：基于CBCT的回顾性分析[J]. 上海口腔医学, 2022, 31(4): 439-444.
[11]	林怡君, 鄢洁雅, 王天鸽, 周志捷, 廖盛轩, 毛丽霞, 刘加强. 减数正畸治疗中中切牙牙根及牙槽骨形态变化的锥形束CT测量分析[J]. 上海口腔医学, 2022, 31(2): 211-216.
[12]	杜悦, 彭笑, 韩瑞, 王栋, 胡洁, 高廷益, 张凯. 颌骨囊肿开窗治疗临床特征动态研究[J]. 上海口腔医学, 2021, 30(6): 658-662.
[13]	马晓晴, 赵宁, 董晛, 钱文昊. 2种锥形束CT转化头颅侧位片的定点一致性探讨[J]. 上海口腔医学, 2021, 30(5): 522-525.
[14]	毛晓燕, 杨佳音, 李佳, 徐睿. 成人骨性Ⅱ类错畸形上气道与上、下颌骨形态分析[J]. 上海口腔医学, 2021, 30(4): 419-423.
[15]	郑美里, 吕政展, 朱柏恺, 汪席均, 瞿然奕, 樊林峰, 江凌勇. 成人上颌骨性扩弓疗效评价及对面中部相邻骨块的影响[J]. 上海口腔医学, 2021, 30(3): 316-322.