口腔内3种合金共存下的离子析出及表面粗糙度的改变

doi:10.19439/j.sjos.2020.01.008

上海口腔医学 ›› 2020, Vol. 29 ›› Issue (1): 40-45.doi: 10.19439/j.sjos.2020.01.008

口腔内3种合金共存下的离子析出及表面粗糙度的改变

张华¹, 周团锋¹, 杨雪¹, 周翊翛²

1.北京大学口腔医学院·口腔医院第一门诊部,国家口腔疾病临床医学研究中心, 口腔数字化医疗技术和材料国家工程实验室,口腔数字医学北京市重点实验室,北京 100034;
2.首都医科大学口腔医学院修复科,北京 100050

收稿日期:2019-07-30 出版日期:2020-02-25 发布日期:2020-03-09
通讯作者: 周团锋,E-mail:1442880187@qq.com
作者简介:张华(1987-),女,硕士,住院医师, E-mail:penshuixiaoxiang@sina.com

Change of ion precipitation and surface roughness of three dental alloys coexisting

ZHANG Hua¹, ZHOU Tuan-feng¹, YANG Xue¹, ZHOU Yi-xiao²

1.First Clinical Division, Peking University School and Hospital of Stomatology, National Clinical Research Center for Oral Diseases, National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing Key Laboratory of Digital Stomatology. Beijing 100034;
2.Department of Prosthodontics, Capital Medical University School of Stomatology. Beijing 100050, China

Received:2019-07-30 Online:2020-02-25 Published:2020-03-09

摘要/Abstract

摘要： 目的：研究口腔内3种合金共存下的离子析出及表面粗糙度的改变,为临床合金修复材料的选择提供参考。方法：制作镍铬合金、钴铬合金和金银钯合金标准试件,分为镍铬合金（N组）、钴铬合金（C组）、金银钯合金（A组）、镍铬合金与金银钯合金（NA组）和镍铬合金与钴铬合金（NC组）5组。浸泡于标准电解质溶液（T=37 ℃,pH=2.31）中,每组平行重复4次。7 d后,用电感耦合等离子体质谱仪检测各组浸提液中离子析出量;用原子力显微镜观察各组试件表面形貌,测量表面粗糙度。采用SPSS 18.0软件包对数据进行统计学分析。结果：析出的镍离子量N组为（1.32±0.03） μg/cm², NA组为(2.13±0.07) μg/cm²,NC组为(1.53±0.08) μg/cm²,NA组、NC组均显著多于N组,NA组显著多于NC组（P<0.05）;析出的铬离子量N组为(0.06±0.01) μg/cm²,NA组为(0.08±0.01) μg/cm²,NC组为(0.05±0.01) μg/cm²,NA组显著多于NC组（P<0.05）。镍铬合金的表面粗糙度N组为(4.60±0.16) nm,NA组为(5.37±0.08) nm,NC组为(5.04±0.15) nm,NA组、NC组均显著大于N组,NA组显著大于NC组（P<0.05）。镍铬合金与金银钯合金或钴铬合金共存时,析出的镍离子量比其单独使用时明显增多,其表面粗糙度明显增大;镍铬合金与金银钯合金共存时比镍铬合金与钴铬合金共存时析出的镍、铬离子量多,镍铬合金的表面粗糙度也大。结论：临床上应尽量避免在患者口腔内同时应用镍铬合金与金银钯合金,或镍铬合金与钴铬合金,尽量避免贱金属的临床使用。

关键词: 合金, 电偶腐蚀, 离子析出, 表面粗糙度

Abstract: PURPOSE: To study the change of ion precipitation and surface roughness of three dental alloys'coexisting in standard electrolyte solution, in order to provide a reference for the selection of clinical alloy materials. METHODS: Standard samples of Ni-Cr alloy, Co-Cr alloy and Au-Ag-Pd alloy were prepared and divided into 5 groups: Ni-Cr alloy(group N), Co-Cr alloy(group C), Au-Ag-Pd alloy(Group A), Ni-Cr alloy contact with Au-Ag-Pd alloy(group NA), Ni-Cr alloy contact with Co-Cr alloy(group NC). All groups of alloys were soaked in standard electrolyte solution (T=37 ℃, pH=2.31) for 7 days. Inductively coupled plasma mass spectrometry (ICP-MS) was used to measure the amount of ions released from each group. The surface morphology of each group was observed and the surface roughness(Ra) was measured using atomic force microscope（AFM）. SPSS 18.0 software package was used for statistical analysis. RESULTS: The amount of nickel ions released from group N, NA, NC was (1.32±; 0.03) μg/cm2, (2.13±; 0.07) μg/cm2, (1.53±; 0.08) μg/cm2, respectively. Nickel ions of group NA and NC was significantly more than that of group N(P<; 0.05), nickel ions of group NA was significantly more than that of group NC(P<; 0.05). The amount of chromium ions released from group N, NA, NC was (0.06±; 0.01) μg/cm2, (0.08±; 0.01) μg/cm2, (0.05±; 0.01) μg/cm2, respectively, the amount of chromium ions of group NA was significantly more than that of group NC(P<; 0.05). The surface roughness of Ni-Cr alloy in group N, NA, NC was (4.60±; 0.16) nm, (5.37±; 0.08) nm, (5.04±; 0.15) nm, respectively. The surface roughness of Ni-Cr alloy in group NA and group NC was significantly larger than that in group N (P<; 0.05). When contact with Au-Ag-Pd alloy or Co-Cr alloy, the amount of nickel ions released and the surface roughness of Ni-Cr alloy both significantly increased. Compared with Co-Cr alloy, Au-Ag-Pd alloy caused Ni-Cr alloy to release more nickel, chromium ions and formed a rougher surface. CONCLUSIONS: It is necessary to avoid simultaneous application of Ni-Cr alloy and Au-Ag-Pd alloy, or Ni-Cr alloy and Co-Cr alloy in the patient's mouth. Non-precious metals should be avoided as much as possible clinically.

Key words: Alloy, Galvanic corrosion, Ion precipitation, Surface roughness

中图分类号:

R783.1

张华, 周团锋, 杨雪, 周翊翛. 口腔内3种合金共存下的离子析出及表面粗糙度的改变[J]. 上海口腔医学, 2020, 29(1): 40-45.

ZHANG Hua, ZHOU Tuan-feng, YANG Xue, ZHOU Yi-xiao. Change of ion precipitation and surface roughness of three dental alloys coexisting[J]. Shanghai Journal of Stomatology, 2020, 29(1): 40-45.

参考文献

[1] Aykent F, Yondem I, Ozyesil AG, et al.Effect of different finishing techniques for restorative materials on surface roughness and bacterial adhesion[J]. J Prosthet Dent, 2010, 103(4): 221-227.
[2] Glauser S, Astasov-Frauenhoffer M, Müller JA, et al.Bacterial colonization of resin composite cements: influence of material composition and surface roughness[J]. Eur J Oral Sci, 2017, 125(4): 294-302.
[3] Mercieca S, Caligari Conti M, Buhagiar J, et al.Assessment of corrosion resistance of cast cobalt- and nickel-chromium dental alloys in acidic environments[J]. J Appl Biomater Funct Mater, 2018, 16(1): 47-54.
[4] Lucchetti MC, Fratto G, Valeriani F, et al.Cobalt-chromium alloys in dentistry: An evaluation of metal ion release[J]. J Prosthet Dent, 2015,114(4):602-608.
[5] Lages RB, Bridi EC, Pérez CA, et al.Salivary levels of nickel, chromium, iron, and copper in patients treated with metal or esthetic fixed orthodontic appliances: A retrospective cohort study[J]. J Trace Elem Med Biol, 2017,40: 67-71.
[6] Qu Y, Lu X, Huang Y, et al.Mechanisms of cytotoxicity of nickel ions based on gene expression profiles[J]. Biomaterials, 2009, 30(2): 141-148.
[7] Reclaru L, Unger RE, Kirkpatrick CJ, et al.Ni-Cr based dental alloys;Ni release, corrosion and biological evaluation[J]. Mater Sci Eng C Mater Biol Appl, 2012, 32(6): 1452-1460.
[8] Zhang Y, Xiao F, Liu XM, et al.Cr(VI) induces cytotoxicity in vitro through activation of ROS-mediated endoplasmic reticlulum stress and mitochondrial dysfunction via the P13K/Akt signaling pathway[J]. Toxicol In Vitro, 2017,41: 232-244.
[9] Karov J, Hinberg I.Galvanic corrosion of selected dental alloys[J]. J Oral Rehabil, 2001, 28(3): 212-219.
[10] 孟贺, 韩东, 战德松. 5种牙科合金对小鼠成纤维细胞毒性及凋亡相关基因的表达[J].中华口腔医学杂志, 2009, 44(8): 497-501.
[11] 杜雅, 黄克强, 芦琳, 等. 4种烤瓷基底冠金属对人牙龈成纤维细胞分泌前列腺素E2和环加氧酶2的影响[J]. 中华口腔医学杂志, 2012, 47(7): 431-434.
[12] ISO 10271 Standard.Dental metallic materials-corrosion test methodsSO 10271 Standard.Dental metallic materials-corrosion test methods[S]. Switzerland: ISO Geneva, 2011.
[13] 林红. 口腔材料学[M]. 第2版. 北京: 北京大学医学出版社, 2013: 21-22.
[14] Popov BN.Corrosion engineering: principles and solved problems[M]. Netherlands: Elsevier B.V., 2015: 239-287.
[15] Ciszewski A, Baraniak M, Brychczyńska MU.Corrosion by galvanic coupling between amalgam and different chromium-based alloys[J]. Dent Mater, 2007, 23(10): 1256-1261.
[16] Manaranche C, Hornberger H.A proposal for the classification of dental alloys according to their resistance to corrosion[J].Dent Mater, 2007, 23(11): 1428-1437.
[17] Imirzalioglu P, Alaaddinoglu E, Yilmaz Z, et al.Influence of recasting different types of dental alloys on gingival fibroblast cytotoxicity[J]. J Prosthet Dent, 2012, 107(1): 24-33.
[18] McGinley EL, Moran GP, Fleming GJ. Biocompatibility effects of indirect exposure of base-metal dental casting alloys to a human-derived three- dimensional oral mucosal model[J]. J Dent, 2013, 41(11): 1091-1100.
[19] Teranaka A, Tomiyama K, Ohashi K, et al.Relevance of surface characteristics in the adhesiveness of polymicrobial biofilms to crown restoration materials[J]. J Oral Sci, 2018, 60(1): 129-136.
[20] Ammar Y, Swailes D, Bridgens B, et al.Influence of surface roughness on the initial formation of biofilm[J]. Surf Coat Technol, 2015, 284: 410-416.
[21] Kim SK, Park IJ, Lee DY, et al.Influence of surface roughness on the electrochemical behavior of carbon steel[J]. J Appl Electrochem, 2013,43(5): 507-514.
[22] Evgeny B, Hughes T, Eskin D.Effect of surface roughness on corrosion behavior of low carbon steel in inhibited 4M Hydrochloric acid under laminar and turbulent flow conditions[J]. Corros Sci, 2016, 103(2): 196-205.

口腔内3种合金共存下的离子析出及表面粗糙度的改变

Change of ion precipitation and surface roughness of three dental alloys coexisting

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	胡丹丹, 任灿霞, 骆小平. 表面处理对激光选区熔化成型纯钛钛瓷结合强度的影响[J]. 上海口腔医学, 2023, 32(3): 230-235.
[2]	徐红珍, 龚志成, 钟群. 选择性激光熔覆钴铬钼合金可摘局部义齿支架的加工精度分析[J]. 上海口腔医学, 2020, 29(6): 596-600.
[3]	施钊铖, 汪黎明, 宋治锋, 敖圣尧, 董聪. 65 μm甘氨酸颗粒用于龈上洁治后抛光的疗效观察[J]. 上海口腔医学, 2020, 29(3): 321-324.
[4]	刘莉, 李波, 虞永芳. 2种方法制作金属基底冠边缘适合性和金瓷结合力比较[J]. 上海口腔医学, 2019, 28(6): 597-600.
[5]	王颖卉, 邱芬芳, 潘宇, 吴维青, 程辉. 反复熔铸对牙科烤瓷合金显微结构的影响[J]. 上海口腔医学, 2018, 27(6): 585-590.
[6]	林泓磊, 江磊, 张长源, 林东红, 程辉. 反复熔铸对钴铬烤瓷合金细胞相容性的影响[J]. 上海口腔医学, 2017, 26(3): 246-250.
[7]	钱玉梅, 钟群, 陈霜. 钴铬合金桩核和everStick纤维桩修复唇、舌向倾斜上颌中切牙疗效比较[J]. 上海口腔医学, 2017, 26(1): 89-93.
[8]	钟群, 彭艳, 邬雪颖, 翁佳炜. 反复烧结对选择性激光熔覆钴铬合金烤瓷冠边缘微渗漏的影响[J]. 上海口腔医学, 2016, 25(6): 663-667.
[9]	彭艳, 钟群, 邬雪颖, 翁佳炜. 不同边缘设计对选择性激光熔覆钴铬合金基底冠边缘微渗漏的影响[J]. 上海口腔医学, 2016, 25(6): 668-672.
[10]	黄一, 胡靖宇, 刘玉普, 赵东元, 余优成, 毕玮. C-SiO₂复合薄膜对口腔钴铬合金耐腐蚀性能的影响[J]. 上海口腔医学, 2016, 25(5): 542-547.
[11]	邬雪颖, 钟群. 3种钴铬钼合金美观卡环用于前磨牙的固位力分析[J]. 上海口腔医学, 2016, 25(3): 284-287.
[12]	戚韩权，张松梅，钱超，郑元俐. 细菌作用时间对不同蛋白质修饰的镍铬合金腐蚀性的影响[J]. 上海口腔医学, 2015, 24(6): 652-659.
[13]	田孝梅，曾丽，魏斌，黄轶锋. 激光熔积钴铬合金的热膨胀系数测定[J]. 上海口腔医学, 2015, 24(6): 687-689.
[14]	闫海鑫，，赵彦博，秦丽梅,，祝海霆,，吴琳,. 钴铬合金、纯钛和Vitallium卡环3年使用期间的固位力变化[J]. 上海口腔医学, 2015, 24(6): 696-701.
[15]	李伟宏, 黄睿, 林华, 李庆艳, 郑新颖, 吕俏, 高宁. 铍对牙龈卟啉单胞菌细胞形态和细胞膜离子含量的影响[J]. 上海口腔医学, 2015, 24(4): 385-389.